Meat-Grinder К7-ФВП-160-03 (Code: )

  Grinder for grinding the cooled boneless meat trimmed from its feed to the working using cone screw feed screw disposed at an angle of 84. The degree of comminution of meat depends on the output diameter of the holes cutting the lattice (from 3 to 25 mm). working gearless drive screw, two-speed motor 18.5; 23 kW, belt transmission belts section 8 B. Drive feed screw conical two-speed motor 2.2; 2.65 kW, planetary gear reducer, chain drive. 4 variants of the working speed and the feed screw for adjusting the degree of grinding The dependence on the initial state of the processed meat. Housing top frameless 4 vibration dampers, has a solid foundation to secure a top drive, the cup is welded to the side walls, working auger housing bolted to the flange of the cup, there are two side doors. On the front wall mounted remote control, turning the cutter cover and hinged service platform. When you open the casing or flip-top site commissioning is not possible. On the back wall is fixed ejector lever operating the auger. There is a mirror of the boot bowl review.